Orcave 101-101 AnyUPS

Technological centers, clouds, telecommunication POPs, critical application servers ...
Perhaps every administrator has gone through the hell of an unreliable UPS that looked like a fully charged, but in the event of an outage instantly "leaned". The solution of a higher quality level is financially several ranks higher.
Orcave 101-101 fills this gap on the market!

POPs always with you

You would know everything about power sourcing of your equipment and servers.
As well, you know the status of the UPS batteries.
You even know whether the incommer is an authorized person and what he did in your space. You could have unlimited number of technological POPs and yet you will sleep peacefully.
Everything you will control remotely, from anywhere and anytime.

Overvoltage from Distributor

Sometimes you have no choice and the technology basement becomes elevator engine rooms, water towers, lookout towers and other locations where everything is possible, but not high-quality power.
With Orcave 101-101, you set up responses to various power failures that will best eliminate them.
You will hardly find facilities with similar capabilities!

Quality in UPS batteries

Orcave 101-101 has 3 independent power supply inputs, two separated at rear, and one input from UPS. Consumption can be measured on UPS and internal BUS.
Additionally, regular battery quality testing of the connected UPS can be set. At an appropriately chosen date and time, the UPS disconnects and the assembly automatically performs a qualitative battery measurement.
You will be informed about the result!

Let the behaviour follows your needs

An internal editor for creating simple scripts allows you to program any behavior. For example, when an outage is longer than x minutes, it starts the outdoor aggregate and switches to it. Or, it will reset the communication switches.
You have several independent timers as well as information about astronomical sunrise / sunset. You can switch relays, motors, lights, heating or air conditioning over power ...

Secure your property and neighbourhood

At the entrance, install a suitable keyboard with a chip reader and identify the people entering your premises. You have 3 physical and 7 virtual readers to log in and unlock the object. The object itself can be divided into up to 8 separate security pseudozones. Connection of different types of sensors (motion, water, smoke, gas, sound, ...) and the ability to respond to them is a matter of course.

To know is to lead

You decide yourself what Orcave 101-101 records, what it should react to and what it will be up to the operator. Knowing on-line you can almost anything - the state of power and individual appliances, their consumption and housebreaking. But it is usually advisable to know backwards what happened at any time in the past. There's a continuos log that you can set up by your needs.

100+1 Orcave 101-101

Professional for RACKs

Orcave 101-101 is a professional product for critical applications. That's why the assembly is in a sturdy, metal cabinet, height 1U, designed for installation in RACK stands. There are 2 independent power inputs on the rear panel and there are power outputs on the front one, UPS input / output, display and a number of application interfaces.

3x independent power supply

Three independent inputs allow different power supply strategies.
Rear panel inputs can be from different phases or even branches. The circuit breaker equipment or power supply interruption at one input does not affect the other. Plugging the UPS into the power loop on the front panel is a guarantee that your technology will be powered really uninterruptedly.

Switch within a halfwave

In the event of a failure, the internal logic of Orcave 101-101 will switch to another power source during a single half wave. As a result, connected devices, however sensitive, do not even notice outage.
For total failure, you can set up how long the individual outputs will be switched on so that the startup of all the appliances does not reset the circuit breaker.

Remote communication in a basement

Similarly to all Orcave assemblies, the 101-101 has remote communication embedded in the basement as well.
Ethernet and GPRS are two independent communication channels that let you know about any POP event, whether in power, temperature, or security.

Practical interfaces

As a further universal interface, you have a special EXT extension, 1x RS-485, 2x RS-232, 3x relay and 4x Open / Close. You can connect many security sensors, RFID keypads, door locks, contactors, lights and various motors to the assembly. This way you could secure the space or manage the Mikrotik restart automatically, we do not need to tell.

Easy to service

Backup 101-101 is provided by a local battery, so it can stay in touch for many hours after the surroundings immersed in the dark. All at once it is equipped with GPS. Even with a large number of locations, the service technician will immediately know where the problem is. Remote console, ConfigKey for easy change of cabinets, display with buttons ... these are basic parameters of a simple service!

Don't be fool and try it!

Choose one of your "more complex" locations and learn about the opportunities which our product offers.
We will lend you Orcave 101-101 for 3 months free of charge and help with setup!
You may be surprised at what is happening with the power and what you can do with it. :o)