A device Orcave 1S10 is a high-capacity microwave link for 10 GHz frequency band. Both, radio and data interfaces parts, are involved in one piece terminal. It is made from alu cast and the weigth is about 5kg. The terminal is to be attached directly to the antenna flange (with an adapt part help). Later it is fixed with 4 screws.
On the lower edge of the terminal are data interfaces - 2x GEthernet (10/100/1000) and 2x E1 (G.703). Except that there is an BNC connector for the link tunning.
Upper edge is equipped with the handle to ease the manipulation. Dimensions of the whole terminal are small (A4 and 11 cm depth), thus it is recommended to complete a terminal with an antenna on the appropriatly compfort place and transport in ready-to-install state.
Unit is powered via TP cabel together with data, PoE+ (802.3at). Cable quality must be equal or better than CAT5e with maximal length up to 100 m (according to norm). Overall consumption up to 15 W.
Operating temperatures from -30°C up to +55°C.
Management system comes as a web client and a customer is allowed to set up all necessary parameters.

Radio part

Radio works with modulation QPSK up to 256QAM.
Forward Error Correction (FEC) uses LDPC method.

Data interfaces

Pure data capacity can be divided into 4 data interfaces outputs. There're two GigaEthernets for Ethernet networks and 2 E1 digital trunks for synchronyous networks.
Parameters of the interfaces match appropriate norms.